Sewer Cleaning Service

With a population of over four million people living in Singapore, providing clean water is essential for the well-being of Singaporeans. The country relies on its four water reclamation sites to treat used water collected through a network of sewers. In 2021 the volume of treated used water was over 608.5 million cubic metres. (source:

Maintaining the network of sewers requires the municipalities and other facilities to take action to improve the system. Using sewer cleaning services to unblock and prevent further deterioration and collapse of this system is essential for ongoing treatment and provision of clean water for Singaporeans. 

Having the right equipment is vital to get the job done right the first time if you’re in the business of cleaning sewers. Read on as we share several reasons why it’s important to maintain a healthy sewer system PLUS a list of four sewer maintenance and cleaning services that operate in Singapore.

Why Do Sewers Need to Be Maintained and Cleaned Regularly?

If sewers aren’t kept clean and maintained regularly, several problems arise with most of them risking the health and safety of people and animals. Here are some reasons why sewers need to be kept in good condition when collecting domestic and non-domestic water sources for treatment.

#1. Prevents Contamination of Canals, Reservoirs and Waterways

Ground movement, tree roots, and general wear and tear of aging sewer systems cause the network to be damaged, deteriorate and eventually collapse. When this happens, the risk of leakage from the sewers increases with waterways, reservoirs, and canals becoming polluted. Contaminated water gives rise to problems including diseases, foul odours, and an increase in pests. 

Singapore’s sewage reticulation system ensures that contaminated water is treated according to stringent international quality standards. However, leaking sewers do pose health and safety threats to recreational and aesthetic water areas. Regular sewer rehabilitation prevents contamination of Singapore’s canals, reservoirs, and waterways for safe public use.

used water network

#2. Reduces Exposure to Illnesses and Diseases

Exposure to sewer sludge and wastewater increases the risk of illnesses and diseases associated with dirty water. If sewer lines are blocked, leakage into public areas, roads, water bodies, and private properties exposes people to infections such as gastroenteritis, E. coli, and Leptospirosis. 

These conditions result in unpleasant and sometimes fatal symptoms such as:

  • Stomach cramps
  • Vomiting and diarrhea
  • Fever
  • Muscle weakness 
  • Tremors and convulsions

Maintaining Singapore’s sewer lines helps to reduce the population’s exposure to waterborne diseases caused by sewage leakage. 

what is gastroenteritis infographic

#3. Eliminates Foul Odours

A deteriorating sewer system not only results in contaminated water sources and exposure to viral or bacterial infections but also produces foul odours. Smelly sewage water creates an unpleasant environment for anyone nearby and people are less likely to spend time at recreational spots. 

Inhaling bad odours from leaking sewers can cause nausea, headaches and dizziness with some people experiencing respiratory and breathing problems. Keeping wastewater systems clean and regularly maintained limits the chances of foul odours as well as the emission of sewer gas which can be detrimental to human and animal health.

#4. Speeds Up Drainage

If regular inspections aren’t performed on the sewer line, the risk of blockage increases. Clogged sewer lines slow down the free flow of wastewater through the system. This results in slow drainage from toilets, sinks, bathtubs, and showers. Poor drainage leads to the buildup of waste, food, and other debris resulting in putrid or unhealthy conditions in homes and commercial properties. 

Ongoing sewer maintenance with high-quality cleaning equipment ensures the system is free of blockages, allowing wastewater to drain speedily. Wastewater can move smoothly through the network of sewers and reach treatment plants unhindered. Regular surveillance and flushing of Singapore’s sewage network ensure the system allows for speedy drainage.

Sewer Cleaning Services in Singapore

If you are looking to work on cleaning your facilities, Syntech Engineers offers high-performance sewer jetting equipment as the official supplier of Rioned sewer jetting machines.

We also manufacture our own sewer jetting machines that can fit your custom needs upon request. Click the link below to contact us directly on your sewer cleaning needs.


If you’re looking to procure the services of a professional sewer cleaning provider in Singapore  instead, scroll down below to find out more;

#1. Lian Shing Construction Co. Pte. Ltd.

Lian Shing sewer cleaning services include non-destructive methods for clearing blockages without damaging the pipes. The company uses a range of equipment and the latest technology to remove debris, sand, grit, tree roots, grease, and other objects from pipes and manholes, efficiently and safely. 

The company’s services include sewer maintenance and rehabilitation as well as CCTV survey and cleaning of holding tanks and drains. They’re equipped to handle pipeline monitoring, leak detections, and emergencies.

#2. PMPS Liner Technology (S) Pte. Ltd. 

PMPS has been involved in lining contracts for “No-Dig” sewer/water pipeline rehabilitation since 2002. The company provides other services such as:

  • High-pressure and high-flow cleaning works for improved pipeline systems. 
  • CCTV pipeline inspections.
  • Sewer flow monitoring.
  • Manhole rehabilitation.

With such services, you can rely on PMPS to give you the best advice for maintaining sewer lines and manholes to prevent problems from cropping up when you least need them to!

PMPS Liner Technology Pte Ltd

#3. Bio-Care Grease Control Pte. Ltd

If you’re in the restaurant or catering business you know how important it is to maintain your kitchen’s sewage system. Bio-Care provides sewer pipe flushing to prevent costly mishaps that could force downtime or closure of your commercial business. 

Sewer cleaning services include using high-pressure water jetting and bioremediation of pipes to prevent grease buildup that could lead to drainage and leakage problems. Bio-Care makes use of highly advanced CCTV cameras to scan your sewer pipes to assess their condition.

Bio-Care Grease Control Pte Ltd

#4. Initial Hygiene

Initial Hygiene’s sewer and drain cleaning services are carried out by specialists equipped to maintain and clean clogged drains and wastewater pipes. The company’s sewer maintenance services include inspecting your plumbing system that connects to the sewer pipes. By keeping the plumbing system in good condition, you can rest assured the sewer line will function better. ‘

Services include:

  • High-pressure water jetting
  • Grease trap cleaning
  • Electromechanical services
  • Emergency drain cleaning

Initial Hygiene

Work with Syntech

At Syntech we provide environmental solutions to help you to maintain sewer and drainage systems. We sell high-quality European sewer cleaning tools and pipeline monitoring equipment and software so you can clean and maintain wastewater pipes regularly. We also build trucks that combine high-pressure water jetting, vacuuming, and recycling systems for sewage maintenance. 

Our cleaning and maintenance products allow you to take proactive steps toward improving the performance of sewer lines. Please feel free to share this article with others searching for top-quality sewer cleaning services in Singapore!

Green rubbish truck on road

Earlier this year, the Singapore news was flooded with a story of a woman who narrowly escaped being struck by a garbage truck. A quick online search shows that garbage truck accidents are not as uncommon as one might expect. 

That said, it’s evident that garbage truck drivers need to exercise an enormous amount of caution when operating their vehicles. Additionally, due care needs to be taken to ensure that all safety measures and procedures are followed. 

At Syntech, we take a more extensive look at the following:

  • Understanding the garbage truck
  • Operating the garbage truck safely
  • Pre-operation checklist
  • Safe ways to dump the load
  • Dealing with potential hazards

Understanding the Garbage Truck

Before a garbage truck driver or assistant starts working on a waste disposal truck, it’s essential to understand exactly how one works. Here’s a breakdown of the basics all waste management crews need to know to avoid any accidents involving any components of these monster trucks. 

  1. Hopper: This refers to the back “bucket” area where garbage collectors place rubbish into.
  2. Compacting mechanism: Garbage is moved from the hopper by the compacting mechanism and then placed into the truck’s body. 
  3. Hydraulic cylinders: Several hydraulic cylinders keep the garbage inside the truck to prevent it from falling out.
  4. Compacting device: Compacts the garbage to allow as much rubbish to be placed inside as possible. To enhance the available space, this device is often placed on the outside of the truck. 

For a more detailed look at the different types of garbage trucks as well as how they operate, we recommend reading our article, “What is a Garbage Truck & How do They Work?” to see some helpful information. 

To procure your own garbage truck for your enterprise, click on the link below.


Operating the Garbage Truck Safely

There are many facets to operating a garbage truck safely. Garbage truck companies have implemented a series of checks and balances to minimise truck accidents and serious injuries. These are discussed below. 

Pre-Operation Checklist

Waste removal vehicles can be dangerous to operate and with so many moving components, personal injury is always a risk. Additionally, since these vehicles operate up and down our busy roads, accidents with commercial vehicles are also not impossible. 

Many garbage truck accident attorneys will agree that faulty components can easily be to blame for many injuries sustained. That said, the truck driver must ensure that a pre-operation checklist is performed before setting out on each route. The most basic of these checks are summarised below. 

Attention: The internal data of table “1” is corrupted!

Driving Safely

Once the truck driver has confirmed that the pre-inspection checklist is done, the next aspect of avoiding garbage truck accidents involves driving safely. Here is a list of the most basic tips to keep in mind when you’re setting out on your route: 

  1. Obey all legislated traffic laws of the area you’re driving in—drivers may need to brush up on local traffic rules if they’re working out of their usual areas.
  2. Maintain a safe speed and following distance between other vehicles.
  3. Check blind spots before turning or changing lanes. 
  4. Use turn signals and hazard lights to advise other motorists of the truck’s intention to turn or stop for a load. 
  5. Watch out for pedestrians, cyclists, and other instances that may cause distracted driving.
  6. Drive slowly in areas of poor visibility, severe weather, and excess traffic.

Operating the Lift Mechanism

Another instance that could result in a personal injury claim stems from incorrect or negligent use of the lift mechanism. To avoid this, truck drivers must enforce the following steps for operating a lift mechanism safely: 

  1. Position the garbage truck correctly.
  2. Use the lift controls EXACTLY as specified for that particular model.
  3. Familiarise your crew with the area to avoid overhead obstacles. 
  4. Check the area to ensure that there aren’t people around who may sustain a personal injury in case of lift failure or any other vehicle malfunction.

Dumping the Load

The next step in preventing a garbage truck accident involves taking caution when dumping the load. Consider the following tips:

  1. Once at the location where the garbage must be dumped, be sure to position the truck correctly and safely. 
  2. Be aware of overhead or surrounding obstacles. 
  3. Secure the load before dumping,
  4. Ensure that mechanisms are operated correctly and in sequence. 
  5. Check for people or objects around the truck before engaging the release mechanisms. 

Dealing with Hazards

The sheer size of even the smallest garbage truck puts it at risk of creating a serious accident. This is especially the case when these trucks move around on busy roads and sometimes experience limited visibility. 

Working on tight schedules may also be a contributing factor when drivers are rushing to complete jobs. Some hazards to keep an eye out for include the following:

  • Overhead obstacles such as low-hanging trees and cables. 
  • Pedestrians and cyclists moving around on your route—especially if the route is during peak or heavy traffic times.
  • Other vehicles. 
  • Uneven or unstable ground.
  • Road construction may make maneuvering on the street difficult.

Tips for Avoiding Hazards and Responding to Them if They Occur

If you’re new to driving a garbage truck in the streets of Singapore, then these common tips for avoiding hazards are worth memorising! 

  1. Familiarise yourself and your crew with the activities in the area around the time you will be working in it. This may involve visiting the site beforehand.
  2. In instances where there are road works, it may be a good idea to check for an alternative route. 
  3. If the ground where you need to stop to collect or dump garbage in uneven or obstructed, look for an alternative stopping point rather than risking a serious accident. 
  4. Keep in mind that the driver and the company in question could be kept liable for the medical expenses of any injuries sustained if safety rules aren’t adhered to. 
  5. When drawing up your schedule, keep in mind that city streets may be more congested than the average residential neighborhoods—you may have to factor in additional travel time. 
  6. Always obey the rules of the road and reduce driving speed in instances of limited visibility. 
  7. Ensure that all crew members working on the garbage truck are familiar with the safety rules, what to do in an emergency as well as how the truck and various mechanisms operate.

Work with Syntech on your Garbage Trucks

Avoiding garbage truck accidents is an essential part of every garbage truck driver’s daily function. Using the tips and suggestions in this article will go a long way toward avoiding serious accidents and any types of bodily injuries. 

Furthermore, if you’re looking for a company to design or custom fit your garbage truck, look no further than Syntech.


If you have found the safety tips and suggestions shared in this post helpful, be sure to share it with colleagues or friends and family working in the trucking or more specifically, garbage truck business. That way, everyone operating garbage trucks can help keep our society safer!

3 Different Commercial vehicles

If you own a business in Singapore, whether you transport light goods or heavy goods, it is important to have the correct vehicle to suit your needs. You would also need to get a valid COE for the commercial vehicle and a license to operate the vehicle. 

If you’re wondering how to buy a commercial vehicle in Singapore, there are several factors to consider, which we’ll discuss in this article. 

How to Own a Commercial Vehicle in Singapore

Before you set out to purchase a commercial vehicle, do your homework to help avoid common pitfalls. Only registered companies are allowed to purchase commercial vehicles in Singapore. Unless you hold a hawker license from the NEA (National Environment Agency), an individual won’t be able to purchase a commercial vehicle. 

Such guidelines are in place so as to prevent commercial vehicles from being used as personal transport vehicles. All commercial vehicles need a COE (Certificate of Entitlement) that allows you ownership of the particular vehicle identified on the certificate. Commercial vehicles can be registered under category C or category E. 

What Are The Different Type Of Commercial Vehicles In Singapore?

Each commercial vehicle serves a specific purpose. They are categorised according to their MLW (Maximum Laden Weigh), except for the GPV (Goods-cum-Passenger Vehicles). 

Below is a detailed description of each of the main types of good vehicles, and what they are used for. It is the responsibility of all vehicle owners to ensure that their vehicles meet the requirements set out below. 

LGV – Light Goods Vehicle

Here is an example of LGV – Light Goods Vehicle

A Light Goods vehicle is a lightweight vehicle with a total gross weight of 3500kg or less. Examples of LGVs include vans, three-wheelers, and pickup trucks. It is typically used for the transportation of commercial goods. Mini busses with a maximum seating capacity of up to 15 passengers are also referred to as LGVs. Fortunately, there are no specific requirements that an LGV must satisfy. 

HGV – Heavy Goods Vehicles

The lorry crane is an example of HGV – Heavy Goods Vehicles.

Heavy goods vehicles include trucks and lorries with an MLW ranging between 3501kg to 16,000kg. It’s typically used to deliver goods. 

There are some safety requirements that HGVs must meet:

  • Blind spot safety requirements: All HGVs must be fitted with two rear-view mirrors. If the MLW is above 12,000kg, it must also have mirrors or cameras to cover the vehicle’s blind spots. These requirements are in place to enhance the safety of your vehicle and to make it easier for the driver to detect pedestrians. 
  • Vehicle parking certificate: An HGV with an MLW over 5,000kg requires a VPC to enable you to park your vehicle in designated parking areas. When your vehicle is not used at night, it must be parked in designated parking spaces between midnight and 6 am. 
  • Vehicle height and size regulations: Heavy vehicles, especially when used to transport weighty cargo, tend to slow down traffic. They have speed limits they need to adhere to; however, a police escort is required to ensure the safety of other road users. The large size and height of these vehicles might affect road structures.

VHGV – Very Heavy Goods Vehicles

The garbage compactor truck is an example of VHGV – Very Heavy Goods Vehicles

Very heavy goods vehicles are used for transport, construction, and other purposes. Large container trucks, garbage trucks, and tow trucks are all examples of VHGVs. Their MLW is above 16,000kg. The same safety requirements that apply to the HGVs, are applicable to the VHGVs.

GPV – Goods-cum-Passenger Vehicles

GPVs can be used to transport both goods and passengers. It can be classified as either a Light Goods Vehicle or a Heavy Goods Vehicle. The way it is classified will depend on its Maximum Laden Weight and examples of GPVs include busses, lorries, and vans. 

Do take note that GPVs must adhere to safety requirements. For instance, lorries are only to be used to transport employees from their workplace to their place of residence. Whilst in transit, all goods onboard need to be safely secured to ensure that it doesn’t pose a threat to the safety of the passengers in transit. 

5 Factors to Consider Before Buying a Commercial Vehicle

When buying a commercial vehicle, there are also factors that you need to consider to make the best possible decision in terms of functionality and value for money. 

Some of the factors to consider include:

  • Value
  • Design
  • Drivetrain
  • Truck size classification
  • Cab configuration

To ensure your commercial vehicle will be appropriate for the long haul, make sure it meets all your requirements, so you don’t find yourself looking for a new one in a few months’ time.  

What is a COE and Do I Need One?

A COE is a Certificate of Entitlement that enables you to own a vehicle in Singapore. Since Singapore has one of the densest vehicle population growths in the world, a landmark scheme called the Vehicle Quota System was implemented to regulate vehicle population. To regulate this, the COE was implemented. A COE is valid for 10 years and will need to be renewed thereafter. 

Choosing The Right Type of Commercial Vehicle for Your Business 

As mentioned above, you need to carefully consider the type of business you run, in order to correctly choose the right type of commercial vehicle to suit your needs. The size of your business and your transportation requirements will greatly influence the type of goods vehicle you choose. Familiarise yourself with the regulations to make sure you and your vehicle comply. 

The Importance of Cargo Space

Cargo space is a factor that you need to consider. Your day-to-day requirements will determine how much space you’ll need. Only opt for larger cargo spaces if you’ll utilise them. Each model differs, so research various options by reading reviews and watching online videos to ensure you choose one that aligns with your practical needs. 

Commercial Vehicle Insurance 

It is required to have vehicle insurance on all commercial vehicles, in the event of any accidents. The best route is to obtain several quotations to compare before making your final choice on an insurance company to partner with. Familiarise yourself with what each company offers and make sure what is covered and what isn’t, so you know what you’re paying for. 

Financing a Commercial Vehicle in Singapore

Another difference between commercial and personal vehicles is the percentage of financing you can obtain. Processes of buying personal vehicles have a lower success rate of getting finance, which may force you to take a loan from your bank instead. However, commercial vehicles can easily get up to 90% financing.

Having financing on a commercial vehicle will enable you to afford a more high-end vehicle, which can significantly generate more revenue in the long run.  

Procure Your Commercial Vehicle With Syntech

If you own a business in Singapore, owning a commercial vehicle can be an important part of your growth. Keeping your vehicle well maintained and your COE up to date, are vital to ensure continuous use of your commercial vehicle. 

Do your research carefully to make sure you choose the right vehicle and always stay on top of the country’s rules and regulations regarding traffic rules and other safety requirements. 

And if you’re looking to procure your commercial vehicles, Syntech is your ideal brand partner. 

Headquartered in Singapore, we design, customise, and fit your trucks to align with your exact needs.

If you have any concerns in this matter, Syntech is an ideal brand to partner with. We are headquartered in Singapore and have many happy clients across Southeast Asia. 



1) What Is Considered a Commercial Vehicle in Singapore? 

There are four main types of vehicles that are considered commercial vehicles in Singapore. They are as follows:

  • Goods-Cum-Passenger Vehicles (GPVs)
  • Light Goods Vehicles (LGVs)
  • Heavy Goods Vehicles (HGVs)
  • Very Heavy Goods Vehicles (VHGVs)

The above-mentioned vehicle types are listed as commercial vehicles according to One Motoring. One Motoring is a website hosted by the Land Transport Authority (LTA).  

2) Can Commercial Vehicles be Used for Private Use?

Commercial Vehicles are only to be used for business purposes such as transporting goods. Using commercial vehicles for personal use is considered an offense according to the LTA (Land Transport Authority). 

Such an offense is susceptible to a fine of $1000 or three months in jail for the first conviction. The second conviction is liable for a fine of $2000 or six months imprisonment. You should always use passenger cars when travelling for personal matters but be careful to not exceed the seating capacity. 

3) How Long Can Commercial Vehicles Be Used in Singapore?

Unfortunately, you have a maximum time of 20 years to use a commercial vehicle. You may be willing to do a COE renewal, but it will be illegal to go on using the vehicle. 

Many people are unaware that Singapore residents generated an average of 1.77 million tons of domestic waste in 2022. With that in mind, it’s clear that the country needs to have an effective garbage disposal system in place. Equally important are the garbage trucks that are tasked with removing all this waste.

What is a Garbage Truck?

A garbage truck is a vehicle that has been specifically designed to collect municipal solid waste. The collected waste then needs to be transported to a solid waste treatment facility. Garbage trucks feature compacting mechanisms and hydraulic cylinders that compress garbage to fit more into the truck.

History of Garbage Trucks

Garbage trucks were first introduced in 1929 in the form of the Heil Collector. This innovative design featured a bucket hopper on the side of the truck which would essentially lift trash and then dump it into the rear of the vehicle. This would happen through an opening at the top.

In 1938, the Garwood Load Packer completely revolutionized the waste management industry when adding a compactor to the design made the process considerably more effective. The first compactor was almost double the truck’s capacity and worked with a hydraulic press. 

The 1970s saw the introduction of the first grapple trucks that were used for municipal waste collection. The world’s first automated side loader was introduced in Scottsdale Arizona. This impressive new truck could easily collect 300-gallon containers in about 30-second cycles. An impressive feature was that this could be done without the driver exiting the vehicle. 

How Does a Garbage Truck Work?

You’ve no doubt seen a garbage truck in action. In fact, you may have seen garbage going in and being compacted. But what’s the science behind the whole process? Here are a few simplified steps to highlight how the process works. 

  • Step 1: Garbage trucks are driven down local city streets where rubbish is collected on pre-determined days. 
  • Step 2: Trash is picked up by garbage collectors and placed into the hopper of the truck. 
  • Step 3: The compacting mechanism removes the rubbish from the hopper and deposits it into the truck’s body. 
  • Step 4: Hydraulic cylinders control the junk inside the truck and prevent it from falling out of the sides.
  • Step 5: The compacting device is situated on the exterior of the truck which allows for more space inside the truck.
  • Step 6: When the garbage truck is full, the driver transports the rubbish to the local dump or waste management facility. 
  • Step 7: Hydraulic cylinders move the compacting panels out of the way as the vehicle tilts up. 
  • Step 8: The rubbish is tossed out of the vehicle and the inside of the truck is hosed out for the next trip. 

Different Types of Garbage Trucks

With the innovations in garbage removal, it’s not surprising that there are different types of garbage trucks to choose from. Essentially, the type of garbage that needs to be removed will determine the type of truck you should consider hiring. There are four main categories of garbage trucks to choose from. These are discussed below. 

1) Front Loader Garbage Trucks 

For the most part, front loaders are garbage trucks that feature automatic forks in the front of the cab. These trucks are primarily used to empty commercial waste bins such as the huge dumpsters you see outside restaurants. With these vehicles, the dumpster is lifted up and emptied into the truck box. 

Some of the benefits of front-loader garbage loaders include the following:

  • Many models can lift about 8000 pounds of waste.
  • Ideal for dumpster-based waste systems.
  • Hydraulic arms can easily lift commercial trash containers.

2) Side Loader Garbage Trucks

With side-loader garbage trucks, the rubbish is collected on the side of the truck. These trucks can be operated manually or automatically and are usually used for residential waste collection and disposal.

In most instances, these trucks are driven by a single person who also controls the side-loading process from the driver’s cab. Manual versions may require a driver’s assistant who will control the lifting mechanism. 

The top benefits of using a side loader garbage truck are listed below:

  • Ideal for residential areas
  • Newer models make use of an electronically controlled hydraulic arm, making them more efficient.
  • In most cases, this garbage truck type only requires one operator which provides a reduced manpower cost.

Below is a short clip that shows how a side loader garbage works. 

3) Rear Loader Garbage Trucks

Another popular type of refuse equipment is the rear-loading garbage truck. With rear loaders, the garbage is gathered from the back. This process works by employees throwing trash bags and bin contents into a big container inside the truck. 

Once the container is full, the contents are compressed. These rear-loader garbage trucks can be used for both residential and commercial waste removal. The most common benefits of using a rear-loader garbage truck include the following:

  • Rear loaders are perfectly designed to remove the residential waste collection. 
  • While they use human workers to empty the garbage into the onboard bin, these trucks can provide waste removal services for more than 800 homes in a single day.
  • With fewer moving parts, the rear loader truck type has minimal chance of breaking down. 
  • These trucks are also easy to manoeuvre through narrow streets which may present a problem for their larger counterparts.

Below is a short clip that shows how a rear-loader garbage truck works. 

4) Roll Off Garbage Trucks

Commonly used for commercial waste removal, roll-off garbage trucks can also be used to gather huge amounts of waste at construction and demolition projects. It’s ideal for moving oversized items. 

Essentially it works by having a dumpster box mounted on a customized roller chassis or trailer that enables the box to be rolled off the truck and left at the job site. Once the box is full, it’s tolled back onto the garbage truck where it is then taken to the landfill or treatment facility for disposal. 

A few of the benefits that make roll-off garbage trucks so popular are listed the following:

  • They can carry about 10 tons of refuse at a single time.
  • Roll-off garbage trucks have a larger degree of flexibility that the other types of garbage trucks simply can’t match.
  • The mechanical simplicity of the roll-off process makes it less likely to experience technical problems than some of the other garbage truck types. 
  • These garbage truck types are among the easiest garbage trucks to operate and maintain.

Work with Syntech your Garbage Truck

Whether you’re reading up on garbage trucks because you need to rent one, or you simply have a keen interest in how the whole process works, this article would have answered all your questions. 

Understanding the different types of garbage trucks will make it easy for you to find the right vehicle for your garbage disposal needs. 




  • What is between a dump truck and a garbage truck?

In many instances, dump trucks and garbage trucks are often mistaken for the same thing. However, the key difference results from ownership of the truck. Often classed as commercial vehicles, it’s important to understand the difference. A dump truck is primarily owned by a construction company and driven by a qualified employee. 

Furthermore, a dump truck might also be owned by a rental company and driven by the renter. On the other hand, garbage trucks are primarily owned by the city, county, state, or private company that works for the city. 

  • How much trash can a garbage truck hold?

If you’ve seen garbage trucks around town then you know that they come in a wide range of different shapes and sizes. An average type of garbage truck can easily hold an estimated 20 tons of garbage before needing to be emptied out. 

  • What is the lifespan of a garbage truck?

As with any other vehicle, the lifespan of a garbage truck depends on how it’s maintained. That said, the average garbage truck can last between 10 and 15 years with regular maintenance. In many instances keeping trucks for a total of 15 years can be challenging because there are often industry changes and weighing options that could influence how long your garbage truck stays operational.

Broken Semi Truck Service

Owning a fleet of trucks means keeping it in good working order and preventive maintenance is key to ensure your vehicles are reliable at all times. Periodic maintenance by our team at Syntech ensures your fleet is working optimally. However, regular maintenance done in advance minimises the risk of breakdowns that could result in costly repairs and downtime for your business.

A well-maintained fleet lets your team get on with the job safely and efficiently with minimal interruptions. Fleet managers who schedule regular preventive maintenance for trucks can assure that the heavy-duty vehicles are operational at all times while keeping your business running smoothly. 

Our preventative maintenance checklist outlines what needs to be done for proper fleet management so your truck drivers can perform their tasks stress-free and on time. 

Preventive Maintenance for Trucks Checklist

#1. Check for Fluid Levels

Checking the fluid levels is one of the simplest ways to avoid serious problems that could lead to damage and costly repairs. This includes checking the truck’s coolant and engine oil as well as braking, power steering, and transmission fluids which only take a few minutes. 

If the fluid levels are dropping between checks it’s an indication of either a leak or fuel consumption problem that needs to be fixed sooner rather than later. The video below demonstrates how to check your truck’s fluid levels. 

#2. Change Fluids

While it’s tempting to get as much mileage as possible out of your truck’s fluids, the long-term cost could result in expensive and time-consuming breakdowns. How often you need to change fluids depends on a number of factors such as:

  • How many kilometers your fleet travels every day
  • The type of terrain your trucks traverse regularly
  • The load weight and carrying capacity of the truck

When changing fluids, refer to the manufacturer’s guidelines for the correct procedure. 

#3. Check Tire Pressure

The correct tire pressure is vital to prevent dangerous situations or damage to the truck when performing work tasks such as transporting loads from one site to another. Inflating tires to the right pressure minimises wear and tear as well as uneven tread which can result in blowouts. 

Secure tire pressure maintains proper traction on the road while optimising fuel consumption and braking and load-carrying capacity at all times. 

#4. Check Tires for Wear and Tear

Checking tires for wear and tear will give you a heads-up if there’s a problem. Uneven tread or worn rubber often indicates incorrect tire pressure or problems with the alignment or suspension of the truck. Replacing worn tires is necessary to prevent blowouts while booking on-site servicing will ensure your truck’s alignment or suspension is properly repaired. 

Inspecting the tire condition and tread depth mitigates the risk of blowouts and poor handling of the truck that could result in serious accidents and work delays. 

#5. Inspect Truck Brakes

Carrying a load requires skilled driving and a fully functioning truck. This includes a proper braking system that can handle loads on all types of terrains. Inspecting the truck brakes is a vital component of a preventative maintenance schedule and entails checking for even wear on both sides and front to the back of the brakes. 

Frequent inspections of the truck brakes for minimum wear will tell you when you need to replace them as soon as possible! To ensure safe stopping, unbalanced brakes must be repaired or adjusted.  Watch the video below which demonstrates how to perform brake inspection and do adjustments.

#6. Check Air Filters

Clean air filters guarantee better fuel economy as well as smoother-running engines. Clogged air filters reduce the amount of air going into your engine which impacts the power of the truck’s motor. Dirty air filters also increase fuel consumption. 

Regular checks and replacing dirty or old air filters keep your trucks in shipshape condition. Even more so if they’re often driven on muddy or dusty roads! 

#7. Battery Test and Electrical System Verification

Part of the fleet preventive maintenance plan should include an annual check on the trucks’ alternators, batteries, and electrical systems. If your truckers are traversing long distances with frequent stops, there’s a huge amount of strain put on the vehicle’s electrical system. 

Battery tests and electrical system verification ensure everything is in good working order before the truck is taken out onto the road. 

#8. Inspect the Gearbox and Clutch

Anyone in the trucking industry is no stranger to heavy workloads and this means keeping a fleet reliable and safe on the road when transporting goods. The gearbox is placed under a huge strain when a truck is carrying heavy loads and has high engine power. Regular gearbox inspections mean you catch major problems quickly and do repairs immediately.

Checking that the clutch isn’t slipping is vital for safe driving when carrying loads. Not only does a damaged clutch affect the reliability of the vehicle but it increases fuel consumption as well. 

#9. Check Truck Lights

Being visible on the road when the weather is poor or at night time is essential for the safety of your trucker, vehicle, and other drivers. Part of your preventive maintenance schedule should include checking that the signal, hazards, and brake lights are working properly. Performing an inspection of the truck’s exterior lights should be done before each trip. 

All it takes is a few minutes of walking around the truck, checking for burnt-out bulbs, and replacing them before hitting the road. Inspecting for broken light shields and replacing them helps to protect the bulb from further damage.

Truck Infographics External Light Check
Taken from

#10. Check for Body Corrosion

Road conditions, exposure to debris such as stones and debris as well as long-distance driving with heavy loads increase the risk of corrosion to your truck’s bodywork. Looking for signs of rust along the bottom of the door frames, on the undercarriage, and on the exhaust system will alert you to body corrosion. 

Rust compromises the truck’s body structure which becomes a safety issue that needs to be fixed before it turns into a bigger problem. Otherwise, your truckers will face handling issues when faced with dangerous situations on the road. Repairing, modifying or replacing the rusted body parts is vital to avoid this from happening. 

#11. Check for Parts That Need to Be Replaced

Ensuring that the heavy-duty vehicle is functional and safe on the road means you need to check for parts that need to be replaced. Before replacing parts make sure you order from a reputable supplier or truck manufacturer for premium-quality replacements. 

The number of fatalities from traffic accidents in Singapore has risen in recent years and it’s imperative to keep your fleet functional to prevent becoming part of these statistics. It’s your responsibility to adhere to the trucking industry’s safety regulations and modifying or replacing parts that are outdated or damaged keeps your team secure when on the road. 


Most truck drivers in Singapore aren’t trained or equipped to perform preventative maintenance and keeping a qualified technician on your payroll can be expensive. The best solution is to outsource fleet upkeep to a certified and reliable truck maintenance service company. 

Let our professional maintenance team at Syntech Engineers do the job for you. We have the right equipment and servicing can be done on-site at your convenience too. We have the right parts in stock to prevent delays and downtime, making our services your solution for managing preventive maintenance tasks and servicing heavy-duty vehicles.  

Prevention is always better than a cure, saving you from high repair costs or unexpected downtime that could have been avoided in the first place! If you found our list of preventive maintenance tips useful, forward it to other fleet managers who would benefit from reading this article.

Inquire on our trucks maintenance services

Environmental cleaning systems play a huge role in creating a safe and healthy environment for communities to live in. That involves implementing a system that can move rain water, waste water and any solids to a treatment and disposal facility. To facilitate this, an effective waste water collection system is made up of an extensive network of pipes, clean-outs, traps, manholes and various other structures.

Equally important are the specialised trucks used to transport the collected waste to the relevant treatment plants. In many instances, cleaning equipment is combined with vacuum trucks to make the cleaning process more effective. This combination of vacuum and jetting capabilities are infused into what is called a Combi truck.

In this article, we will be introducing the components and various brands that make up the environmental cleaning systems that are currently in use to service/maintain sewers in Singapore. Syntech is the distributor and service centre for these items below.

Recommended Sewer Cleaning Equipment / Vehicle to Use 

IBAK Pipeline TV Systems

IBAK CCTV systems have been making waves since their inception in 1945 in Germany. Essentially, the IBAK range of products makes it considerably easy to inspect pipelines and identify potential issues. By using unique technological features, IBAK products are functional while also carrying value in terms of durability.

Additionally, the IBAK systems can be used in conjunction with Syntech tankers trucks to minimise the need for personal protective equipment. The most significant products in the IBAK sewer range include the following:

  • Tractors
  • Scanning software
  • Camera heads and systems
  • Control Units
  • Cable Reels and Winches

ENZ Sewer Jetting Nozzles

The ENZ range of sewer nozzles is reputed to be among the top cleaning solutions currently in use in Singapore. Designed in Switzerland over 20 years ago, these nozzles provide innovative cleaning for any type of environmental surface as well as sewers, tubes, pipes, and drains that form part of the drainage system.

Aside from being durable and efficient, these nozzles make cleaning more sanitary and limit cleaning staff from having to physically handle any hazardous materials. This not only increases infection control but makes routine cleaning a breeze. Since the nozzles are configured with ceramic inserts, you can expect durability and high levels of efficiency.


Originally from Finland, PICOTE is one of the top manufacturers, worldwide, of quality pipe cleaning and rehabilitation machines. By developing specialised millers and tools, they can easily enable trenchless rehabilitation inside buildings. They’re also able to renovate drains from the rooftops to the city sewer. In many instances, this means that pipe clearance can happen without needing to dig trenches or shut the system off for repair work.

Various PICOTE machines can do all of the following tasks:

  • Cut through clogs and debris in the pipes
  • Remove built-up lime scale that sticks to the sides of pipes
  • Can remove roots in smaller pipes and drains
  • Easily removes fat build-up that may form in pipes from residential and commercial kitchen disposal

Trenchless technology is one of the more advanced methods to refurbish pipelines because it not only limits skin contact with soiled items but is also more economical. Furthermore, PICOTE cleaning tools are considerably more environmentally friendly. Another plus point is that all PICOTE machines are designed to work with a wide variety of tools to accommodate all pipe sizes.


Essentially, the WinCan software program is a modern and more effective way to conduct wastewater pipe inspections. WinCan software has been around for 30 years and has completely revolutionised the way sewer inspections are done. By opting to use equipment, rather than actual people in the sewer pipes, the risk of exposure to infectious disease is minimised.

As the global leader in CCTV pipe inspection software, you can expect the following:

  • An inspection video, images, and report of the area you want to inspect.
  • An environmentally friendly way to inspect pipes and drains to assess debris accumulation and various troubleshooting options.
  • Your team will have real-time access to all inspection data—this will allow them to review, code, and even edit received information.
  • Reports combine graphs, tabular data, and schematics.
  • A camera device—or pipe crawler as it’s called—records the image.
  • The operator then inputs the data and generates a report.

Sewer Jetting Equipment

To make routine cleaning easier, you can also have Syntech sewer jetting equipment mounted to your commercial trucks or trailers. These units can easily be customised to accommodate all your specific vehicle needs. Sewer jet cleaners use high-pressure hot water to flush out any debris, dirt, sludge, and any other forms of blockages from the pipes. This type of cleaning is highly effective for removing any obstructions in the pipes.

Vacuum Tanker Truck

In 1987, Syntech became the first Singaporean company to manufacture truck-mounted vacuum tankers. Additionally, high-pressure water jetting was soon added to these trucks to make terminal cleaning considerably easier. Vacuum tanker trucks are considered to be the most efficient method of cleaning local sewer lines because it’s a relatively easy way to remove any obstructions.

With tankers that range in size from 1,000 to 18,000-litre capacities and suction rates that range from 4,500 lpm to 130,000 lpm, they can be used across multiple industries as part of their regular contact precautions. Additionally, some vacuum trucks can also be equipped with water jetting capabilities to ensure that your facilities are kept clean.

Some of the common uses of a vacuum tanker truck include the following:

  • Sewer pipe cleaning which can involve septic emptying or catch basin cleaning.
  • Hydro and vacuum excavation.
  • Assisting with projects that involve requiring waste removal of debris or liquids (common industries that use vacuum tanker trucks include healthcare facilities and abattoirs).
  • Clear blockages within the sewer system.
  • Performing regular maintenance on sewer components increases the lifespan of the pipes and system in general.

Your Partner in Environmental Cleaning Systems

Cleanliness and sanitation are crucial to ensuring public health. Environmental cleaning systems are the way forward to ensuring that sewers and relevant pipelines are not only clean but also functioning properly.

If your business is looking for an effective sewer cleaning system, a customised vacuum truck, or even a sewer jetting truck, Syntech has just what you need. Headquartered in Singapore, Syntech has also supplied to other southeast Asian countries such as Indonesia, Thailand, Vietnam, and the Philippines.

Contact Syntech for more information on environmental cleaning systems

If you found this article informative, please share it with anyone who will benefit from our extensive product range and services!



1) What can we use our cleaning equipment with?

The good news is that the bulk of our cleaning equipment can be used in collaboration with vacuum tankers. This makes it easier to clean any type of surface in a cost-effective and environmentally friendly manner. Providing this level of cleaning goes a long way to keeping up with disease control regulations. 

2) What is the difference between a sewage system and a drainage system?

The key difference between a sewage system and a drainage system is as follows:

  • Drainage system: This type of system is primarily used to run off excess water (such as rainwater) to reservoirs, the sea or other storage facilities. 
  • Sewage system: A sewage system is a drainage system that is used exclusively for carrying wastewater and sewage to a pre-determined treating plant where the waste is treated and disposed of. 

3) What is the function of a sewage system?

For the most part, a sanitary sewer system is created to protect public health as part of a community disease control program. This is done by moving water away from public exposure. 

Sewer systems are usually comprised of a series of underground pipes, manholes, and pumping stations to move sewage from residential, commercial, and industrial properties. This wastewater is transported to treatment plants where it’s cleaned, treated, and recycled back into the local environment.


trucks on the road

Trucks are crucial to several different industries. Whether you’re in the building sector, logistics or construction, your business will undoubtedly make use of a wide variety of trucks. And even if you’ve used them before, you may not realise the diversity of trucks on today’s market. There’s much more than the cement mixer truck you commonly see and delivery trucks for day-to-day deliveries! 

When considering which truck is best for your particular needs, it might be helpful to know several common truck stats in the local and global markets. Keep reading as we delve into some of the more significant statistics doing the rounds in the truck sector. 

Key Trucks Stats

Essentially, the truck transport market is made up of truck transportation services that include over-the-road cargo transportation as well as local service providers. A few key global statistics worth considering in this area are mentioned below.

  1. 2021 saw an impressive commercial vehicle production growth to about 23.2 million units. This is a significant growth from the three million unit drop highlighted in 2020. 
  2. According to the same report, Germany-based Daimler Truck showed an annual revenue of 39.76bn euros, making them the leading truck manufacturer globally for 2021. 
  3. The general global automotive manufacturing market was worth an estimated 2.86 trillion U.S. dollars in 2021. Experts expect this figure to grow to at least 2.95 trillion by the end of 2022.
  4. Furthermore, the Global Newswire report shows that the global dump truck market is expected to increase from $44.28 billion in 2021 to a minimum of $48.71 billion in late 2022.
  5. The concrete mixer truck industry is expected to show a growth of 3% by 2027, putting the market at an expected $11.81 billion by 2030. This is largely due to the demand for rapid urbanisation. 
  6. The average revenue generated in the United States for 2021 was $875.5 billion.
  7. Freight and logistics are expected to grow by 8% by 2027 in Singapore. 
  8. The U.S. freighting industry had around 232,700 staff employed in 2020.
  9. Between 2018-2020, Singapore employed about 86,300 people in the logistics sector.
  10. There are 8,500 transport companies in Singapore, whereas the U.S. reportedly has an estimated 570,179 long-distance freight trucking companies. 

top 10 image

Top 10 Countries with the Most Trucks

A summary of 58 countries has shown the average vehicle sales to be 444,636. The highest of these was reported in the U.S. with an impressive 12,058,515 while the lowest was reported in Jordan at 7,296. 

A concise breakdown of the top 10 countries with the most trucks is shown below.

Ranking Countries Commercial Vehicles Sales as @2021
1 U.S.A 12,058,515
2 China 4,793,283
3 Canada 1,384,245
4 Japan 772,642
5 India 677,119
6 Brazil 561,384
7 Mexico 526,593
8 France 483,279
9 Thailand 436,380
10 U.K. 396,910

While Singapore might not have made it to the top 10 list, it’s worth noting that they showed a 2,21% increase, reporting a total of 45,442 units sold compared to 2020. It’s also interesting to mention that China was the market leader in 2019.

Top 10 Countries with the Most Truck Production

When it comes to the most truck production, this is how the global competitors stacked up for 2019.

Ranking Countries Top Countries in Trucks Production
1 China 2,217,847
2 Japan 506,393
3 United States 346,366
4 India 276,921
5 Mexico 213,933
6 Brazil 113,476
7 South Korea 93,443
8 Indonesia 91,757
9 Russia 64,201
10 Italy 49,832

Top Truck Manufacturing Companies in The World

While there are hundreds of different truck brands in the industry, there are some that stand out above the rest. 

  1. Mitusbishi Fuso
  2. Iveco
  3. MAN
  4. Tata
  5. Ashok Leyland
  6. Mahindra
  7. Eicher Motors
  8. Asia Motor Works
  9. Hindustan Motors
  10. Force Motors
  11. Bharat Benz
  12. Volvo
  13. Swaraj Mazda

What Industry Uses The Most Trucks?

If you’ve ever wondered which industries use the most trucks, the answers may surprise you! Keep reading to see why.

In the U.S

Based on a 2022 report, here are the top uses for trucks in the U.S.

  • Laundry transport services
  • Chemical transports
  • Storage services & furniture movers
  • Transport for air freight businesses
  • Appliance delivery

In Singapore

According to the Glassdoor report, a few of the top uses for trucks in Singapore include:

  • Courier services (such as DHL)
  • Shipping (such as Amazon)
  • Marine transportation (imported and exported goods transported to and from the various harbors)

Truck Accident Statistics

A report discussing the various truck stats that make up the industry data wouldn’t be complete without a look at truck accident statistics. As unfortunate as they are, truck accidents are a reality no matter where you live. Some key statistics to review in this regard are listed below. 

In the U.S

A recent report from House Grail in the U.S. averages the number of truck-related fatalities in 2021 – 2022 to be about 4,000. Additionally, there are also an estimated 130,000 minor injuries involving accidents with all types of trucks. 

In Singapore

2018 saw 31 injuries involving accidents with or in trucks, lorries, tipper trucks and trailers in Singapore. This decreased by one in 2019. While there isn’t a clear number of accidents reported for the period 2020 – 2022, the report does highlight that 73% of heavy vehicle drivers admit to speeding when the traffic is light. 

Truck Driver Statistics

truck driver sitting on the side of truck

Some common truck driver statistics from the U.S and Singapore are highlighted below.

In the U.S

In Singapore

Significant driver statics from Singapore include the following:


If you’re looking to get into the trucking industry, it’s well worth familiarising yourself with a few of the general statistics. Understanding those that define the trends in the trucking industry might be the deciding factor in your purchasing decision. We trust that our article has highlighted the most significant industry-related stats that you might find functional and informative! 


According to a recent study, revenues in the Singapore food market are expected to rise to an estimated US$9.88bn by the end of 2027. With that said, it’s important to note that a huge chunk of this revenue comes from the perishable goods industry. 

Aside from moving perishable goods, there could be several reasons why you need to utilise freezer truck rental in Singapore. Whether you’re in the food service industry, transporting pharmaceuticals or even conveying temperature-sensitive items from a museum, refrigerated truck rental is often the most convenient.

If you don’t often use refrigerated trucks, you might find it time-consuming to shortlist options. Fortunately, we’ve done the legwork for you and compiled a list of some of the top options to consider when you need to hire a refrigerated truck. 

If you are looking to permanently own a freezer truck instead of just renting, contact us at this link below.

Enquire Here

List of Refrigerated Truck Rental Companies in Singapore

Temperature-sensitive items can easily become spoiled if they aren’t transported and stored correctly. This in turn can lead to a significant financial loss. 

That’s why it’s crucial to opt for a rental company that can provide you with the right type of freezer truck. Keep reading as we provide feedback on a few of the top refrigerated truck rental options to consider in the Singapore area.1. RentaLorry

RentaLorry boasts a wide variety of transport trucks including their popular refrigerated trucks with advanced cooling systems. Depending on your specific transport needs, you can choose between smaller vans or larger chiller trucks. 

Unlike many of its competitors, RentaLorry doesn’t use regular insulation systems. Instead, their freezer trucks are fitted with state-of-the-art cooling systems that ensure temperatures can be regulated as required. 

Their trucks are ideal for food storage, making it convenient to transport perishable foods, beverages, and medicines. Extra accessories make it easy to meet all your transporting needs. With RentaLorry you can expect well-maintained vehicles, superior after-sales service, and competitive prices.

2. Nam Seng Cargo Gear Suppliers Pte Ltd

If you’re looking for refrigerated trucks with specialised cooling systems, you should consider Nam Seng Cargo Gear Suppliers Pte Ltd. Founded in 1988, these impressive truck rental agents have everything on offer from forklifts to quality freezer trucks. 

It’s worth mentioning that their cooling systems are designed and maintained to exceed industry standards. Additionally, their fleet also contains freezer trucks that have been fitted with tailgate hydraulic systems that make for easy loading. 

This ensures that goods aren’t damaged or spoiled while heavier items are being manually loaded or unloaded onto the trucks. Compartments and specialised racks make it easy to safely transport perishable goods. They are also well-known for their efficient and reliable customer service. With a biz SAFE3 certification, you can be assured that your perishable products are in safe hands!

3. A2B Mover SG

A2B Mover is well known around Singapore for being able to transport your perishable goods around the country without risking the integrity of your products. Freezer trucks are not only well maintained but provide a temperature-controlled environment for your perishable goods.

The freezer trucks on offer from A2B Mover are suitable to move any items such as pharmaceuticals drugs, fine art, and tobacco products that require controlled temperatures as well as designated humidity levels. They offer competitive pricing, fully-equipped moving teams, and a wide range of service areas. 

4. OMNI Global Pte Ltd 

Another rental company well worth adding to your shortlist is OMNI GLOBAL PTE LTD. With a variety of different-sized freezer trucks, you’re guaranteed to find the perfect option for your transport needs. 

Not only do they have optional tailgate accessories to make loading and offloading easier, but their vehicles also boast adjustable temperatures to suit any type of perishable goods. With their airtight features, you’re also assured that your goods will stay fresh during transport. In addition to being known for their professionalism, their service is punctual and affordable.

5. Goldbell Engineering Pte Ltd

As a rental company with 40 years of industry experience, Goldbell Engineering Pte Ltd is a firm favourite in the freezer truck rental business. Their extensive fleet includes refrigerated truck options specifically designed for transporting goods within food and beverage organisations. 

Since certain types of perishable products require specific temperatures to remain fresh, it’s always advised to use freezer trucks that can easily alternate between freezing and below-freezing temperatures. 

Adjustable temperatures make the transport of temperature-sensitive goods a breeze. Complementary aftersales service and comprehensive transport solutions ensure that you’ll be able to rent the right freezer truck for the job.

6. Lala Move

Another popular rental option in the freezer truck industry is LaLa Move. With their recent vehicle upgrade, they can now offer new refrigerated trucks with improved cooling systems. Aside from being well insulated, chilled goods can be stored below atmospheric temperature while frozen items are ideally stored below freezing point. 

Furthermore, another new feature on offer is the tailgate mechanism that enables goods to be easily loaded and unloaded at the pick-up and drop-off points. With no surcharge, it’s easy to see why this option is often the top choice.

7. OTC Asia Logistics

OTC Asia Logistics has been around since 2010 and is well known for providing logistical solutions across Asia. The refrigerator trucks, commonly referred to as “reefer trucks”, are available in two common sizes. 

The smaller freezer truck type has a capacity of 3.5 tons and can easily transport 5 pallets of perishable goods. The bigger version, on the other hand, boasts a 10-ton capacity and can transport about 12 pallets of temperature-sensitive items. Opting for the right size truck will minimise having to do more trips than you had initially budgeted for.

Aside from a host of refrigeration features, the trucks from OTC Asia Logistics are equipped with real-time GPS tracking and monitoring of location. That way you’ll ensure that your goods get to their destination on time, every time!


When you’re considering freezer truck rental, it’s important to shortlist a few potential companies that can assist you. Always check the specifications of the freezer trucks on offer versus the needs of your products. This includes checking for specific temperatures on offer in the trucks, and reviewing the options of tailgates, and also capacity. That way you’ll be sure to rent the perfect truck for the job.

Alternatively, if you have freezer trucks that need maintenance, it’s important to note that Syntech can easily assist with this. Furthermore, Syntech can also customise any of your existing vehicles to meet any refrigeration needs. Keep in mind that this will be done strictly according to relevant industry standards. Let Syntech help you get the edge over your competitors!

Enquire Here

If you’re searching for a vehicle to transport liquids and gas such as petrol, diesel, chemicals or even beverages, you should be looking at a tanker truck, also known as a tank truck. This vehicle can transport large liquid hauls, especially dangerous gases, on the road. Depending on your individual requirements, these carriers can take small or medium loads.

Keep reading if you want to find out more about tanker trucks, their history and the different types available. We’ll also talk about the different sizes tanker trucks come in plus answer some frequently asked questions about this type of carrier.

What is a Tanker Truck?

A tanker truck is used to carry liquids or gases on the road. Various tank designs are dependent on the type of liquid being transported. They can be pressurised or non-pressurised, insulated or not and can carry single or multiple loads. Tanker trucks should only be operated by experienced truckers.

History of Tanker Trucks

In the 1880s, oil was transported in cans on horse-drawn carts! Fast forward to 30 years later when Standard Oil, an American oil production, transportation and refining company introduced the first motor tanker. In 1920, Anglo American Oil brought in underground tanks and delivery tankers to the UK.

Soon afterwards, in 1921, Pickford Oil joined the foray into tanker trucks. The company invested in 1,000 (4,500 litres) tanker trucks, increasing its fleet to include 3,600 (16,000 litres) carriers in the 1930s. Other countries were slower on the uptake with New Zealand welcoming their first petrol tanker in 1927 to the sounds of a brass band parade!

Different Types of Tanker Trucks

There are different types of tank trucks available and knowing their features will help you decide which one you need for your specific business. Keep in mind that more developed countries have specific safety standards that should be noted when picking a tanker truck for your carrier needs.

Oil Tanker Truck

Oil tanker trucks are designed to store and transport petroleum products to filling stations. They’re normally larger in size than some other trucks and constructed with steel or aluminium materials. The shape of oil tanker trucks varies, being either semi-elliptical or cylindrical.

Aircraft refuellers are a type of oil tanker truck used to transport aviation fuel to a stationary aircraft. These refuellers have fuel hoses that are attached to the aircraft’s tanks for refuelling. They’re designed for both overwing and underwing refuelling functions and some come with scissor lift platforms.

When choosing an aircraft refueller or oil tanker truck, consider their volume capacities which can differ depending on their size and purpose.

Vacuum Tanker

A vacuum tanker is specifically designed to pneumatically suck up liquids. Its features include a tank and a pump and can be used to suck up slurries or sludges from underground locations. Once the liquid is pumped into the tank, the vacuum tanker truck is driven to another location, such as a treatment plant, to offload the contents.

Examples of common liquids pumped and transported by this type of tanker truck include:

  • Fecal sludge from septic tanks or pit latrines
  • Industrial waste
  • Animal waste from livestock facilities

Depending on what you need, vacuum tankers can be equipped with high-pressure pumps and water-jetting machines for advanced functionality and improved performance.

Common Large Tanker Trucks

Oil tanker trucks are the most common type of large carrier. However, larger tank trucks can be used for transporting liquified loads such as molasses, milk, vegetable oils, liquid sugar, wine, water and industrial chemicals. They’re typically constructed with stainless steel, carbon steel, aluminium and fiberglass reinforced plastic materials depending on the type of fluid being stored and transported.

The inner tank can be compartmentalised for carrying multiple, mixed loads and is a common feature of oil tanker trucks, transporting different gas grades to a filling station. Tanks with multiple compartments make it easier to transport different petroleum products at the same time.

Common Small Tanker Trucks

Smaller tanker trucks are normally designed to carry up to 11,000 litres of liquids. You can commonly use them to transport lightweight liquids or gases to homes, retailers and other businesses trading in or using liquids such as liquified petroleum gas or liquid propane.

Vacuum tankers and aircraft refuellers can fall into this category, depending on their size.

Sizes of Different Tanker Trucks

When selecting a tanker truck, it’s important to take note of its size and volume capacity. These will vary depending on the truck’s specifications and regulations stipulated by your local government. Restrictions are placed on commercial vehicles, including tanker trucks, for the safety of all road users and this does impact the size of liquids carriers.

The size range of tanker trucks is quite vast. Smaller lorries can carry 1,000 litre baby tankers while others can transport 11,600 litre tanks. Larger trucks (up to 12 m) can haul up to 27,000 litre tanks. Semi-trailers measuring up to 18 m, including the trailer, can also haul up to 27,000 litres of liquids.

The maximum capacity of a tanker truck depends on the density of the liquids being hauled. A typical oil tanker truck can haul 250 barrels of oil, equivalent to just over 39,747 litres. The capacity of water tank trucks can vary from 1,890 litres to 43,910 litres.

Tanker Trucks For Your Industrial Needs

Tanker trucks play a vital role in the economy when storing and transporting various liquids and gases. Purchasing a tanker truck for your business depends on a number of factors such as the type of liquids or petroleum products being hauled, volume capacity and safety regulations. Whether you’re looking for premium oil tanker trucks or vacuum trucks, complying with road transportation safety standards is essential.

Give Syntech Engineers PTE Ltd a call on +65 6266 1088 if you’re looking to design or fit a tanker truck. Our headquarters are based in Singapore and we operate in other South East Asian countries such as Malaysia, Indonesia, Thailand, Vietnam and the Philippines.

Tanker trucks are the way to go if you’re in the business of hauling liquids or gases safely. Please share this article if you’ve found it informative and interesting!


1. What is carried in a tanker truck?

A range of liquids and gases can be carried in a tanker truck. These include gasoline, diesel and other liquid fuel products. They can be used to carry alcohol and most flammable or combustible fluids. Tanker trucks are sometimes used to transport non-flammable liquids such as milk or molasses.

These carriers are useful for storing and transporting most liquids and the tanks are designed to handle mildly corrosive products. Various materials are used to construct the tank depending on the type of liquid or gas being carried. Tanker trucks can’t store or transport pressurised gases or dry bulk cargo.

2. How much volume does a tanker truck carry?

The volume capacity of a tanker truck depends on its size and other specifications as well as government regulations. In the U.S, the volume capacity is controlled by the 80,000 lb. gross weight limit for trucks. For smaller tanker trucks, the maximum capacity is 13,638 litres while larger carriers are restricted to 52,735 litres.

Oil tanker trucks in countries such as Singapore can range between 1,500 litres and 27,000 litres.

3. Do tankers carry petrol and diesel?

Tankers do carry fuels and gases such as diesel, petrol, paraffin, kerosene and gas oil. Different grades and types such as 4-star, super unleaded and unleaded, must be treated differently and listed accordingly on documents when being stored and transported.

The tanker truck is constructed with materials such as mild steel or aluminium that can handle this specific type of fluid for both storage and transportation purposes. A petroleum and flammable transportation license is compulsory in countries such as Singapore for businesses storing and transporting fuels in tanker trucks.

Contact Syntech

We will contact you soon!